Model
|
R503
|
Type
|
Capacitive Fingerprint Module
|
Interface
|
UART(TTL)
|
Resolution
|
508 DPI
|
Voltage
|
DC 3.3V
|
Fingerprint Capacity
|
200
|
Sensing array
|
192*192 pixel
|
Working current
|
20mA
|
Standby current
|
Typical touch standby voltage: 3.3V, Average current: 2uA
|
Fingerprint module external size
|
Diameter 28 (mm)
|
Fingerprint module inner size
|
Diameter 23.5 (mm)
|
Fingerprint module height
|
19 (mm)
|
Effective collection area
|
Diameter 15.5 (mm)
|
Connector
|
MX1.0-6Pin
|
LED Control
|
YES
|
LED Color
|
Blue and Red
|
Scanning Speed
|
< 0.2 second
|
Verification Speed
|
< 0.3 second
|
Matching Method
|
1:1; 1:N
|
FRR
|
≤1%
|
FAR
|
≤0.001%
|
Work environment
|
-20C —60C
|
Work Humidity
|
10-85%
|
Anti-static capacity
|
15KV
|
Abrasive resistance intensity
|
1 million times
|
Communications baud rate (UART):
|
(9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps)
|
·Provide Free Reference SDK Files for Arduino, Android,.Net,Windows and so on.
·Provide User Manual
Fingerprint module+Nut
Specification: R503 Circular Round Capacitive Fingerprint Module Sensor
|
6 Months Warranty
This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.
What voids the warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
12 reviews for R503 Circular Round Capacitive Fingerprint Module Sensor
Add a review
20,78$
J***s –
.
M***o –
Excelente acabamento. Muito bonito também. Estou usando com um ESP32 e uma biblioteca de Fingerprint para MicroPython. Também funciona com a biblioteca da Adafruit. Excelente aquisição.
I***m –
Thank you sir. I have received the item. but I’m still confused to control the led, is there a sample program?
P***f –
Works very well. Tested on Arduino Nano. Looks good, smooth case and nice surface. Good quality.
R***i –
Good
A***n –
Made a door opening mechanism. Everything works well. Does not recognize the print if the fingers are wet.
M***n –
heavy, good quality. wasn’t able to try it yet.
G***o –
Excellent Seller and Product !!! THANKS !!! ++++
P***o –
All fine, thanks!)
M***h –
All Super, welcome again!
G***a –
The only problem that I could find was the function finger.fingerFastSearch() from Adafruit library… It doesn’t work with this sensor… Other than that everything seems fine…
J***z –
All perfect