Adeept Hexapod 6 Legs Spider Robot Kit with PDF Guidebook
Hexapod robot, or spider robot, is one type of multi-legged robots. The design of this robot is derived from insects in nature, especially principles of their movement.
In this robot kit, a complete set of hardware devices are provided as well as example code for your learning. You can also write the code for control by yourself. By programming the robot, you can control each leg and even each joint, and truly feel the thrill and joy of learning and making.
The Adeept Arduino UNO R3 board is used as the core control board for this kit, and an Adeept 32 Channel PWM Driver board for control of 19 servos onside.
After assembly, you can see 2 parts, the hexapod robot and a remote control. They communicate through NRF24L01 2.4G wireless communication module on each.
1,The 6-Legs Spider Robot kit is designed based on Arduino UNO R3 and Nano. This is a complete and fun Arduino/Robot
learning kit. We carefully prepared a detailed guidebook/tutorial(PDF), the guidebook contains complete circuit
diagrams and assembly steps, according to our tutorial, you will be able to easily build your own Spider Robot.
2,The entire system is divided into two parts, the Spider Robot and the remote control, the communication between them
based on NRF24L01 2.4G wireless module.
3,Adeept Arduino UNO R3 and Nano are included.
4,Quick-responding technical support for free.
5,Working Voltage: DC 7V~12V, Powered by four 18650 rechargeable lithium batteries.(This kit does not contain
batteries and you need to prepare yourself)
1 Set Acrylic Plates
1x Adeept Pixie(Robot Main Board based on Arduino)
1x ESP8266 WiFi Module
1x MPU6050 Gyro Sensor Module
14x AD002 Servo
1x Ultrasonic Range Sensor
2x Adeept WS2812 RGB LED Module
1x Micro USB Cable
1x Battery Holder
1x Cross Socket Wrench
3x Screwdriver(Small*1 and Large*2)
Other Necessary Accessories(Wires, Nuts, Screws, Copper Standoffs, etc.)