4 Channel Universal Remote Control Code Grabber
433Mhz Universal Remote Control Code Grabber For Gate Wireless RF 4 Channel Electric Cloning For Gate Garage Door Car Keychain
1.This remote control can duplicator 433.92Mhz Came remote control as below:
-
TOP432SA
-
TOP432A,TOP434A
-
TOP432EV,TOP434EV
-
TOP432M,TOP434M
-
TOP432NA,TOP434NA
-
TOP432S,T432,T434
-
TWIN2,TWIN4
-
TAM432SA
-
T432,CAMET434
-
TOP432A,TOP434A
-
TOP432
2.Your remote control photo must the same as us , if do not will be useless
Before buying, please confirm whether your remote control can be copyed or not.
Our remote control can copy the fixed codes and learning codes (Common chips include PT2262, PT2264, PT2260, PT2240, EV1527, FP527, etc.) rather than stealth codes. It can/'t copy original car remote control, two-way remote control and rolling code remote control (Rolling code chips start with HCS commonly, such as HCS200, HCS201, HCS300, HCS301, etc)
Specifications:
-
Operating frequency: 432-435MHz
-
Powered by 27A 12V battery (included)
-
Weight:23g
-
Package Weight:33g
-
Size: 55mm x 28mm x 14mm
-
Distance: Up to 100 meters
Package:
1pc×Remote Control (without retail package.)
Copying method:
Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off.
Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on – off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys.
NOTE: This product can copy the remote control with the following chip inside: PT2264, PT2262, PT2260, PT2240, SC2262, SC2260, EV1527, SCT527, HS1527, HS2240, SCL1527, FP1527. If you fail in copying with proper operation, you might have to check whether your device has a chip above.
Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off.
Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on – off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys.
Specification: 4 Channel Universal Remote Control Code Grabber
|
6 Months Warranty
This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.
What voids the warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
19 reviews for 4 Channel Universal Remote Control Code Grabber
Add a review
8,92$
H***a –
Good remote control! Programmable easily
A***v –
Thank you! Everything is programmed and works.
T***v –
With the receiver dorhan until 2016, works through the programming of 3-4 buttons, works only through two buttons, i will change the receiver.
V***v –
I recorded the button a, everything worked well, the gate opened, but after i recorded the button b, the button a stopped working, maybe i do something wrong or several buttons are not recorded at the same time.
N***Y –
It came in 3 weeks .. Phoenix v2 from the gate went perfectly. The signal power is excellent-even from the opposite room on the 5th floor opens!
A***v –
The goods came quickly, weeks 2, tried to program itself, did not work, as they indicate, i’ll try directly from the gate, with the staff serving, after i add a review. Dorhan gate.
M***i –
OK
I***k –
Bought on march 6, 2019. Inside is not specified production date. Keychain working. Instruction included in english.
A***n –
Three weeks. Work with came. the signal is good.
P***o –
Everything is fine! It came quickly! Thank you store!
S***o –
The goods did not come
M***h –
Fast shipping and shipping, this is a plus. The look of the keychain is also nothing. But to the gate did not register, and the key was not duplicated, for this minus the star. Read more carefully “questions and answers”, it is really not suitable for all firms.
S***v –
The product corresponds to the description, without problems copied the keychain from the gate “came”. The keychain went long, threw in the mailbox. I advise the store, everything works cool.
A***o –
Moscow reached in 45 days. They threw it in the mailbox. Looks good. The indicator works. We will test-sign.
K***v –
Wanted to create a clone doorhan, but does not react to the gate.
A***n –
Quickly everything works
A***v –
Keychains seem to be programmed, but neither the alarm nor the gate is triggered ((
K***k –
Super!
D***r –
Thank you Have a good day